How to remove / replace alarm panic button

How to remove / replace alarm panic button

To replace an alarm panic button, you first need to unscrew and remove the lid. Please note if a tamper is wired, this will set the alarm off. To

How to remove / replace alarm PIR sensor
Don’t know Pyronix Euro 46 alarm code, how to make new alarm code
How to Reset your Texecom alarm

To replace an alarm panic button, you first need to unscrew and remove the lid. Please note if a tamper is wired, this will set the alarm off. To silence the alarm, enter your 4 digit code.

Now disconnect wires from device (either 2 or 4 wires depending on whether there’s a tamper circuit wired in).

Finally, unscrew backplate from wall and remove wire. Do the reverse to re-fit.

Still, need help?

If you still need help with your alarm, then get in contact with our team to see if we can help you >>

Burglar alarm Tech support

Or if you know you need an engineer then book an ‘on-site visit’ where one of our trained engineers comes out to your site to fix your problem.  Book an engineer visit here  or email us at help@smartsecurity.support

Book alarm engineer visit