If you've got an old Menvier alarm system, and its one of the following models, here's the instructions for changing the alarm code on your alarm sys
If you’ve got an old Menvier alarm system, and its one of the following models, here’s the instructions for changing the alarm code on your alarm system:
To change the user code on your Menvier alarm system, you need to:
- Enter your current 4 digit code, followed by ENT twice, followed by 4 and then ENT once again.
- Now enter your new 4 digit code, followed by ENT. Then press ESC and ESC again to get back to the home screen. You now will have a new code set-up.
Video guide to changing your TS700, TS690, TS900 & TS510 alarm code
If you need further help, then watch this video explaining how to change the code of your Menvier / Cooper alarm system.
Still, need help?
If you still need help with your alarm, then get in contact with our team to see if we can help you >>
Or if you know you need an engineer then book an ‘on-site visit’ where one of our trained engineers comes out to your site to fix your problem. Book an engineer visit here or email us at firstname.lastname@example.org