The following is a quick guide to how to replace an old alarm battery in a Menvier alarm system, including the following alarm models: TS510 alarm
The following is a quick guide to how to replace an old alarm battery in a Menvier alarm system, including the following alarm models:
- TS510 alarm battery
- TS700 alarm battery
- TS400 alarm battery
- TS900 alarm battery
- TS690 alarm battery
To change the battery in your Menvier alarm, you need to:
- Remove the cover of your main alarm panel by unscrewing the two screws. The alarm will then sound. To silence the alarm enter your 4 digit user code.
- Locate the battery and remove the two terminals (red and black) making sure these don’t touch, and removing and replacing the battery. Please note, there is live 240V power in the transformer – so please be careful and make sure you don’t touch this. Also please make sure you don’t knock any of the other wires in the panel – as these may cause your alarm to stop working.
- Now replace the lid, making sure you replace screws firmly. Please note, to reset the alarm an ‘engineer reset’ is required – meaning that you need to book in an engineer to visit the site and reset the system.
Step-by-step video guide of replacing a Cooper/Menvier alarm battery
If you need further visual help, the following is a video guide of replacing TS400, TS700 & TS900 alarm battery.
Still, need help?
If you still need help with your alarm, then get in contact with our team to see if we can help you >>
Or if you know you need an engineer then book an ‘on-site visit’ where one of our trained engineers comes out to your site to fix your problem. Book an engineer visit here or email us at firstname.lastname@example.org