Welcome to our troubleshooting guide for the JSB FX2202CPD fire alarm panel. From resetting the panel to conducting system tests and viewing event history, this guide will provide clear and concise instructions to help you effectively manage the FX2202CPD panel.

How do I enter Access Level 2 on the FX2202CPD?

To enter Access Level 2, enter the code 3112.

How do I reset the FX2202CPD fire alarm panel?

To reset the panel after a fire alarm activation or fault indication, follow these steps:

• Enter access code Level 2.
• Press the “Reset” button on the panel.

How do I silence the alarm on the JSB FX2202CPD fire alarm panel?

To silence the alarm during an alarm activation, follow these steps:

• Enter access code Level 2.
• Press the “Silence Alarm” button on the panel.

How can I evacuate using the  JSB FX2202CPD fire alarm panel?

To activate the evacuation alarm on the panel, follow these steps:

• Enter access code Level 2.
• Press the “Evacuate” button on the panel.

How do I disable a detection zone on the  JSB FX2202CPD fire alarm panel?

To disable a detection zone, follow these steps:

• Enter access code Level 2.
• Press the “Disable Zone” button on the panel.
• Follow the instructions on the panel to select and disable the desired zone(s).

How do I enable a detection zone on the  JSB FX2202CPD fire alarm panel?

To enable a detection zone, follow these steps:

• Enter access code Level 2.
• Press the “Enable Zone” button on the panel.
• Follow the instructions on the panel to select and enable the desired zone(s).

How do I disable sounders on the  JSB FX2202CPD fire alarm panel?

To disable sounders on the panel, follow these steps:

• Enter access code Level 2.
• Press the “Disable Sounders” button on the panel.

 How do I enable sounders on the  JSB FX2202CPD fire alarm panel?

To enable sounders on the panel, follow these steps:

• Enter access code Level 2.
• Press the “Enable Sounders” button on the panel.

How do I mute the internal buzzer on the  JSB FX2202CPD fire alarm panel?

To mute the internal buzzer on the panel, follow these steps:

•  Enter access code Level 2.
• Press the “Mute Buzzer” button on the panel.

How do I test the panel indicators on the  JSB FX2202CPD fire alarm panel?

To test the panel indicators, follow these steps

• Enter access code Level 2.
• Press the “Test Panel Indicators” button on the panel.
• All indicators will light up, and the panel internal buzzer will sound.

How do I perform a weekly call point test with the  JSB FX2202CPD fire alarm panel?

To perform a weekly call point test, follow these steps:

• Enter access code Level 2.
• Press the “Weekly Call Point Test” button on the panel.
• Follow the instructions on the panel to activate the test using the test key.

Still, need help?

If you still need help, get in contact with our team to see if we can help you >>