How to change Accenta alarm battery

How to change Accenta alarm battery

To change the battery in your Accenta alarm, you first need to remove the cover of your main alarm panel by unscrewing the screw on the lid of the p

Veritas alarm tamper fault
Veritas alarm won’t turn off
ADT Honeywell Galaxy alarm trouble-shooting guide

To change the battery in your Accenta alarm, you first need to remove the cover of your main alarm panel by unscrewing the screw on the lid of the panel. The alarm will then sound. To silence the alarm enter your 4 digit user code.

With the panel now open, locate the battery and remove the two terminals (red and black) making sure these don’t touch, and removing and replacing the battery. Please note, there is live 240V power in the transformer – so please be careful and make sure you don’t touch this. Also please make sure you don’t knock any of the other wires in the panel – as these may cause your alarm to stop working.

Now replace the alarm panel lid making sure you replace the screw firmly. Reset the system by pressing X.

Still, need help?

If you still need help with your alarm, then get in contact with our team to see if we can help you >>

Burglar alarm Tech support

Or if you know you need an engineer then book an ‘on-site visit’ where one of our trained engineers comes out to your site to fix your problem.  Book an engineer visit here  or email us at help@smartsecurity.support

Book alarm engineer visit