How to change Honeywell Galaxy alarm battery

How to change Honeywell Galaxy alarm battery

To change the battery in your Honeywell Galaxy alarm (models G2 and G3), you first need to remove the cover of your main alarm panel by unscrewing t

Hikvision Camera ‘connection failed’ problem on iVMS-4500 app – How to Fix
Veritas alarm bell is ringing. How do I stop it?!
Engineer reset required – ADT Honeywell Galaxy alarm problem

To change the battery in your Honeywell Galaxy alarm (models G2 and G3), you first need to remove the cover of your main alarm panel by unscrewing the two screws either side of the panel. The alarm will then sound. To silence the alarm enter your 4 digit user code.

With the panel now open, locate the battery and remove the two terminals (red and black) making sure these don’t touch, and removing and replacing the battery. Please note, there is live 240V power in the transformer – so please be careful and make sure you don’t touch this. Also please make sure you don’t knock any of the other wires in the panel – as these may cause your alarm to stop working.

Now replace the alarm panel lid making sure you replace screws firmly. Reset the system by Entering ‘Use Code’ and ‘Ent’, followed by pressing ‘A’ – to view events. Then finally PRESS ‘Ent’ and ‘Esc’.

Still, need help?

If you still need help with your alarm, then get in contact with our team to see if we can help you >>

Burglar alarm Tech support

Or if you know you need an engineer then book an ‘on-site visit’ where one of our trained engineers comes out to your site to fix your problem.  Book an engineer visit here  or email us at help@smartsecurity.support

Book alarm engineer visit