Quick guide on how to change a Scantronic 9448 / 9427 battery Remove the Main Panel lid (with 1 screw). Silence the alarm by entering your 4
Quick guide on how to change a Scantronic 9448 / 9427 battery
- Remove the Main Panel lid (with 1 screw).
- Silence the alarm by entering your 4 digit user code.
- Remove and replace battery.
- Replace lid.
- Enter your 4 digit code to reset.
More In-depth User Guide
To change the battery in your EATON Scantronic 9448 or 9427 alarm, you first need to remove the cover of your main alarm panel by unscrewing the single screw on the right of the panel. The alarm will then sound. To silence the alarm enter your 4 digit user code.
With the panel now open, locate the battery and remove the two terminals (red and black) making sure these don’t touch, and removing and replacing the battery. Please note, there is live 240V power in the transformer – so please be careful and make sure you don’t touch this. Also please make sure you don’t knock any of the other wires in the panel – as these may cause your alarm to stop working.
Now replace the lid, making sure you replace screws firmly, and reset the alarm by entering your 4 digit code.
Watch how to video
Watch the following how to video giving you a step-by-step guide as to how to change the battery in a 9448 alarm:
Still, need help?
If you still need help with your alarm, then get in contact with our team to see if we can help you >>
Or if you know you need an engineer then book an ‘on-site visit’ where one of our trained engineers comes out to your site to fix your problem. Book an engineer visit here or email us at help@smartsecurity.support